Traxxes Slash Class
Slash Rules
1. All trucks must use the factory Traxxas body, or the Pro-line slash
specific models.
2. No modifications may be made to the chassis system. Vehicle must
be raced in its stock form. Original Traxxas replacement parts are allowed
for broken or worn parts.
3. Both the front and rear suspension systems must remain in stock form.
Original Traxxas parts only. No hop up replacements. Rpm rear hub carriers
are allowed.
4. Original 5805 Traxxas kit white shock springs may be used. Shock
caps may be replaced with alum shock cap 2667 and Traxxas turnbuckles
3139X, 3139A, 3737, and 3737A may be used.
5. No modification may be made to the steering system.
6. Any manufacturer’s bearings may be used.
7. Original RTR kit electronics, speed control and servos, only. You
may install any different receiver you like.
8. This class is restricted to a stock Traxxas titan 12t motor
9. This class is limited to any 7.2v NiCad, NiMah made up of 6 sub c
size cells or lipo 7.4v 2c battery packs.
10. Original Traxxas slash 2.2” wheel only.
11. Original Traxxas 2.2” tires only.
12. Only the original Traxxas drive train may be used. No aftermarket
or hop up replacement drive components may be installed. Traxxas steel
planetary gear differential only. Any of the three Traxxas spur gears
may be used. Any pinion gear that mounts without modifications needed
may be used. Ball diffs are not allowed.
13. All trucks must weigh no less than 4.75 pounds race ready.
WebMaster - John Marshall